Linkskey LKV-IPM01 - Manual (Page 75)

KLE User Guide R1.2
Enable KLE PPP Server for connection request from a peer computer
Enable PPP Server : Check this option if you want to enable KLE as a PPP server,
which could accept a peer computer’s PPP connection request either over a direct
serial cable connection, or via a dial-in modem connection.
PPP Connection over direct serial cable with KLE as PPP Server
To enable KLE as the PPP server, you should still specify the following settings ….
- - 71
KLE IP address : Enter an IP address here (default = 192.168.2.200) to be used by
the KLE in the PPP connection. This IP address here entered will be used only in PPP