Linkskey LKV-IPM01 - Manual (Page 74)

KLE User Guide R1.2
4.13 WAN PPP – PPP Server and Client
After any setting change, click the Submit button to save new setting to the KLE database, and then click
Apply Setting to apply new settings to KLE immediately.
KLE can either serves as a PPP server for the peer computer to dial-in for connection,
or as a PPP client to dial in a PPP server to connect to a network or the Internet. The
PPP connection serves as a backup connection mode when direct network connection
is not available or just broken down. With KLE’s high speed serial control interface,
it could offer excellent bandwidth to PPP connection either when KLE is connected as
PPP server or PPP client.
PPP Connection
Disabled PPP :
The default setting of this PPP connection option is default to Disable PPP.
If you have direct network connection, normally you don’t have to choose PPP
connection as your connection mode. Thus, the Disable PPP option is the default
setting. However, if direct network connection is not available, you could choose to
enable KLE in PPP server mode or PPP client mode according to the real connection
scenarios.
- - 70