Linkskey LKV-IPM01 - Manual (Page 44)

KLE User Guide R1.2
Connection Info (Win32 viewer)
New connection
Make another new connection by the viewer.
Save connection options
Save the connection options settings such as those connection parameters specified
within the Connection Options Box and also the password within the registry of the
client computer.
By selecting this option, you can save your session password as well as other
connection parameters in the registry of your client computer, so that next time
when you log in the viewer for a new session, you will not be prompted for session
password again. However the client path phrase required in the connection of Level
3 security (128-bit SSL encryption and PKI Authentication) will not be saved and will
be asked for every time when you login under Level 3 security setting.
Screen Refresh
Force updating of the viewer screen output
Full Screen
Change the viewer screen to Full Screen mode (Only the Win32 Viewer supports this
Full Screen option).
Send Ctrl-Alt-Del
Send a Log On (Log Off) key sequence to the remote end.
Scanning
Start scanning through computers by issuing a programmable port switching
commands with a delay time to a conventional KVM Switch behind KLE.
Computer Power Off
Send a Power Off serial port command to the remote power control unit (Only
SUPERADMIN or ADMIN is allowed).
Computer Power On
Send a Power On serial port command to the remote power unit (Only SUPERADMIN
or ADMIN is allowed)
- - 40