Linkskey LKV-IPM01 - Manual (Page 70)

KLE User Guide R1.2
However, some other command string you will see in the editable area might seem
as complex as 0 1 0 1 d(1000) ESC.
For example: in the editable area now you have …
0 1 0 1 d(1000) ESC Æ send out ScrollLock–ScrollLock–0-1-0-1, then delay 1000 milliseconds and then
send out an Escape key as port switching sequence when clicking 1
st icon on the Select Computex Box…..
0 1 0 2 d(1000) ESC Æ send out ScrollLock–ScrollLock–0-1-0-2, then delay 1000 milliseconds and then
send out an Escape key as port switching sequence when clicking 2
nd icon on the Select Computex Box…..
…………………………………………………………………………………….
0 1 0 8 d(1000) ESC Æ send out ScrollLock–ScrollLock–0-1-0-8, then delay 1000 milliseconds and then
send out an Escape key as port switching sequence when clicking 8
th icon on the Select Computex Box…..
The hotkey sequence , 0 1 0 1 ESC, means switching to bank 01 port 01 and then
revoke the OSD menu by an ESC key. Note that you should have at least one white
space between keycode entries. Also you should enter one line of command string
per port. To select a port, KLE generates first the Escape hot key sequence selected
above, followed by the port sequence into the line corresponding to the port number.
Thus, together with the preceding hotkey sequence, ScrLk – ScrLk, this will make up
a complete hotkey command for port selection.
- - 66