Linkskey LKV-IPM01 - Manual (Page 76)

KLE User Guide R1.2
connection by KLE alone, and should be distinct from the IP address (default =
192.168.1.200) that is specified in the LAN TCP/IP page and used for connection via
direct network.
Peer IP Address : Enter another IP address here (default = 192.168.2.201) to be
assigned by KLE to the peer computer that has requested a PPP connection to KLE
PPP server.
User Name : Here you should specify the user name for PPP connection login by the
peer computer.
Password : Here you should specify the password that is used by peer computer.
Confirm password : Here type in the same password again for confirmation.
Modem Initialization (Chat Script Style) : the modem initialization script is a chat
script that will initialize modem to be ready for connection. The standard script
provided here by default should be able to work on most of the PPP connection over
direct serial cable (Null Modem):
TIMEOUT 3600
CLIENT CLIENTSERVER\c
PPP Connection KLE Local IP address : When the PPP connection is established, the
KLE local IP address that is used for PPP connection will be shown here, for example:
192.168.2.200. However, if the PPP connection is not yet established, the IP address
will be shown as Unknown. Note that this IP address is used for KLE PPP server, and
is distinct from the one (default = 192.168.1.200) that is used by KLE on local area
network.
Enable KLE PPP Client for Dial-in connection to a PPP server in your ISP or
to an Enterprise PPP Server
You could enable the PPP Client feature, if the only way to get your KLE on network
is through KLE’s dial-in request to your ISP or enterprise PPP server. In most cases,
you should request a fixed IP address for KLE as a PPP client, so that remote users
who will access KLE will know how to access its correct IP. If, however, the a static
IP is not available, as in some cases using a dial-in account given by ISP, you could
always look up the dynamic IP assigned to KLE by your ISP or enterprise PPP server
and give it to those remote users who will want to access KLE in this way.
First, you should have an Dial-in account from your ISP or enterprise RAS service that accept PPP
connection over phoneline.
Enable PPP Client : Check this option if you want to enable KLE as a PPP client,
which could dial in via a phone modem to your ISP or Enterprise PPP server.
User Name : Here you should specify the user name used by KLE as a PPP client to
log in to the ISP or enterprise PPP server.
Password : Here you should specify the password that is used by KLE for logging in
to the PPP server.
- - 72