Precision Digital PD650 - Manual (Page 84)

Model PD650 Large Display Process Meter Instruction Manual
84
INSTALLATION
The meter overall dimensions are as shown:
Figure 28. Overall Dimensions
Wall Mounting Dimensions
There are four mounting holes on the rear of the enclosure. They are used to
mount the instrument to a wall. The dimensions for the mounting holes are
shown in the following figure.
13.49" (342.6)
13.54" (344.0)
0.25" (6.2) dia. typ.
3.
2"
(
82)
Figure 29. Wall Mounting Dimensions
Procedure:
1. Drill holes into the wall to accommodate suitable fasteners.
2. Remove the front bezel from the housing by removing the four mounting
screws.
3. Align the enclosure mounting holes with the holes in the wall and insert the
fasteners. Tighten the fasteners.