TA Triumph-Adler DC 2116 - Manual (Page 102)

System Settings
3-20 ADVANCED OPERATION GUIDE
1 Display the Machine default screen, refer to Access the Machine Default
Screen, on page 3-15.
2 Press S or T to select Special P.
type and press [Enter].
3 Press S or T to select Match
Print Direction or Fast Mode and
press [Enter].
4 Press [Reset]. The Copier Basic screen returns.
Original Orientation
Use to set the default Original Orientation.
1 Display the Machine default screen, refer to Access the Machine Default
Screen, on page 3-15.
2 Press S or T to select Orig.
direction and press [Enter].
3 Press
S or T to select Rear or
Left top and press [Enter].
4 Press [Reset]. The Copier Basic screen returns.
Auto Sleep Time
Use to set the time that elapses before the Auto Sleep function is activated
if the function has been enabled.
Time that can be set:
• Inch Specification — 1 to 240 minutes (in 1 minute increments)
• Metric Specification — 1 to 120 minutes (in 1 minute increments)
NOTE: It is recommended to set a longer time if you use the machine
frequently.
1 Display the Machine default screen, refer to Access the Machine Default
Screen, on page 3-15.
Machine Default:
Specific P. Type
P. Type (Weight)
P. Type (2sided)
Fast Mode :
Specific Paper Type:
Match Print Direction
Fast Mode *
Orig. Direction Rear :
Machine Default:
P. Type (2sided)
Specific P. Type Fast Mode :
Orig. Direction:
Rear
Left top
*