TA Triumph-Adler DC 2116 - Manual (Page 22)

Copy Functions
1-12 ADVANCED OPERATION GUIDE
4 Press [Start].
If using the optional Document
Processor, copying completes
automatically.
If using the platen, a message
displays when the next original is
required. Position the next original
and press [Start].
When all originals have been scanned, press [Enter].
Margin Mode
The image of the original can be shifted to make a margin (blank) space at
the left or top side of the copy. You can set the width of each margin to
1/8" to 3/4" in 1/8" increments (1 mm to 18 mm in 1 mm increments).
NOTE: To set the default value for Margin Width, refer to Margin Width
Default Value, on page 3-11.
1 Position the original and press
[Margin].
2 Press S or T to select Left
Margin or Top Margin and press
[Enter].
3 Press < or > to select the Margin
Width, 1/8" to 3/4" in 1/8"
increments (1 mm to 18 mm in 1
mm increments) can be selected.
Press [Enter].
4 Press [Start]. Copying commences.
Margin:
Left Margin
Top Margin
1/8"
Margin Width:
1/4" 3/4"