TA Triumph-Adler DC 2116 - Manual (Page 78)

Printer Settings
2-50 ADVANCED OPERATION GUIDE
Printer Function Resetting
This function resets the printer’s temporary settings (such as the current
page orientation and font) to the default settings.
1 Display the Others screen, refer to Access the Others Screen, on page 2-
48.
2 Press
S or T to select Printer
Reset and press [Enter].
3 Press
S or T to select OK and
press [Enter].
The printer functions are reset.
Resource Protect Mode
The Resource Protect Mode protects the resource data such as
downloaded fonts and macros and memorizes the PCL resources even if
the emulation mode is switched off. If you select Permanent, temporary
resources are not protected. If you select Perm/Temp, temporary
resources are protected.
1 Display the Others screen, refer to Access the Others Screen, on page 2-
48.
2 Press
S or T to select Resource
Prot and press [Enter].
3 Press
S or T to select Off,
Permanent or Perm/Temp and
press [Enter].
4 Press [Reset]. The Printer Basic screen displays.
Form Feed Time-Out
Others
Print HEX-DUMP
Printer Reset
Printer Reset
Back
OK
Resource Prot.
Others
Print HEX-DUMP
Printer Reset
Back
Off
Resource Prot.
Permanent