TA Triumph-Adler DC 2116 - Manual (Page 41)

Printer Settings
ADVANCED OPERATION GUIDE 2-13
4 Press
S or T to select On or Off
and press [Enter]. If On is
selected, Change # displays.
5 Press
S or T to select Change #
and press [Enter].
6 Press S or T to select the frame
mode and press [Enter].
7 Press [Reset]. The Printer Basic screen displays.
EtherTalk
Set this option to On if connecting to an Apple Macintosh computer.
1 Display the Interface screen, refer to Access the Interface Screen, on page
2-11.
2 Press
S or T to select Network
and press [Enter].
3 Press
S or T to select EtherTalk
and press [Enter].
4 Press
S or T to select On and
press [Enter].
5 Press [Reset]. The Printer Basic screen displays.
Back
On
NetWare
Off
On
NetWare
Off
Change #
Back
Auto
NetWare Frame
802.3
Back
Parallel
Interface
Network
Network Setting
NetWare
TCP/IP
EtherTalk
Back
On
EtherTalk
Off