TA Triumph-Adler DC 2116 - Manual (Page 89)

System Settings
ADVANCED OPERATION GUIDE 3-7
Priority Cassette
You can select the cassette (1 to 4) that is automatically selected with
priority.
NOTE: For the 16 ppm model, cassettes 2 to 4 are included in the
optional Paper Feeder. For the 20 and 25 ppm models, cassettes 3 and 4
are included in the optional Paper Feeder. This setting displays only if the
optional Paper Feeder is installed.
IMPORTANT: You cannot set the Multi-Bypass Tray as the priority
cassette.
1 Display the Copy Default screen, refer to Access the Copy Default Screen,
on page 3-3.
2 Press S or T to select Default
Cassette and press [Enter].
3 Press S or T to select the priority
cassette and press [Enter].
4 Press [Reset]. The Copier Basic screen returns.
Default Magnification
Select whether or not to set the Auto Zoom Ratio selection mode when a
cassette is selected.
1 Display the Copy Default screen, refer to Access the Copy Default Screen,
on page 3-3.
2 Press
S or T to select Default
Magnif and press [Enter].
3 Press
S or T to select 100% or
Auto % and press [Enter].
4 Press [Reset]. The Copier Basic screen returns.
Paper Select
Paper Type(Auto)
Copy Default:
Default Cassette
Plain
:
:
Auto
Casset.1 :
Default Cassette:
Cassette 1
Cassette 2
*
Cassette 3
Paper Type(Auto)
Default Cassette
Copy Default:
Default Magnif.
Plain
:
:
100%
Casset.1 :
Default Magnification:
100%
Auto %
*