TA Triumph-Adler DC 2116 - Manual (Page 77)

Printer Settings
ADVANCED OPERATION GUIDE 2-49
Form Feed Timeout
If this machine does not receive any information indicating the end of data
after receiving the last data, the machine waits for a certain time without
printing the last page. When the preset time elapses, the machine
automatically performs a form feed. If you set the time to 0, the machine
does not perform a form feed until GO is manually selected.
1 Display the Others screen, refer to Access the Others Screen, on page 2-
48.
2 Press S or T to select Form
Feed Time Out and press [Enter].
3 Press < or > to set the time, 0 to
495 seconds in 5 second
increments can be selected.
Press [Enter].
4 Press [Reset]. The Printer Basic screen displays.
Received Data Dump
You can print data received as hexadecimal codes for debugging
programs and files.
1 Display the Others screen, refer to Access the Others Screen, on page 2-
48.
2 Press S or T to select Print HEX-
DUMP and press [Enter].
3 Press S or T to select OK and
press [Enter].
Waiting displays and then the
Printer Basic screen.
4 Send data to the printer, dump pages are printed.
5 Press S or T to select GO and press [Enter].
6 Press [Reset]. The Printer Basic screen displays.
Back
Form Feed Time-Out
Others
Print HEX-DUMP
(0
Form Feed Time-Out
30 495) sec.
Back
Form Feed Time-Out
Others
Print HEX-DUMP
Back
OK
Print HEX-DUMP