TA Triumph-Adler DC 2116 - Manual (Page 46)

Printer Settings
2-18 ADVANCED OPERATION GUIDE
Emulation
The following settings are available:
• Emulation Mode Selection
• KC-GL Pen Thickness
• KPDL Error Printing
• KPDL (AUTO) Alternative Emulation Selection
NOTE: You can set the emulation for each interface.
Emulation Mode Selection
Emulation modes that can be used with this machine: PCL6, KC-GL,
KDPL, KDPL (AUTO), Line Printer, IBM Proprinter, Diablo 630, EPSON
LQ-850
If you set KC-GL, you can set the thickness of the pen and page size.
If you set KPDL (AUTO), switching between KPDL and an alternative
emulation mode will be automatically performed according to the print
data.
If you set KPDL or KPDL (AUTO), the details of any error that occurs during
printing can be printed.
1 Press [Printer].
2 Press S or T to select MENU
and press [Enter].
3 Press
S or T to select Emulation
and press [Enter].
4 Press
S or T to select the
interface and press [Enter].
5 Press
S or T to select the
emulation mode and press
[Enter].
GO
CANCEL
Ready
MENU
Print Status Page
Menu
Interface
Emulation
Back
Parallel
Interface
Network
Back
PCL 6
Emulation
KC-GL