TA Triumph-Adler DC 2116 - Manual (Page 42)

Printer Settings
2-14 ADVANCED OPERATION GUIDE
TCP/IP
Set this option to On if connecting to a Windows network via TCP/IP.
1 Display the Interface screen, refer to Access the Interface Screen, on page
2-11.
2 Press S or T to select Network
and press [Enter].
3 Press S or T to select TCP/IP
and press [Enter].
4 Press S or T to select On and
press [Enter].
DHCP
Set this option to On if using DHCP (Dynamic Host Configuration Protocol).
1 Display the TCP/IP screen, refer to TCP/IP, on page 2-14.
2 Press
S or T to select Change #
and press [Enter].
3 Press
S or T to select DHCP and
press [Enter].
4 Press
S or T to select On and
press [Enter].
Back
Parallel
Interface
Network
Back
NetWare
Network Setting
TCP/IP
Back
On
TCP/IP
Off
On
Off
TCP/IP
Change #
Back
DHCP
TCP/IP Setting
IP Address
Back
On
DHCP
Off