TA Triumph-Adler DC 2116 - Manual (Page 124)

Job Accounting
4-8 ADVANCED OPERATION GUIDE
Fax Transmission Limit
Use to permit or prohibit faxing if the optional Fax kit is installed. If faxing
is permitted, the total number of fax transmissions can be limited or set to
No Limit.
NOTE: This item displays if Fax Job Accounting is set to On, refer to Fax
Job Accounting, on page 4-13.
1 Display the Limit in use screen, refer to Registering a New Account, on
page 4-4.
2 Press
S or T to select Fax TX
and press [Enter].
3 Press
S or T to select No limit,
Counter limit or Is not permitted
and press [Enter].
- No limit — Does not set
the limit of count of fax transmission.
- Counter limit — Set the limit of count of fax transmission (0 to
999,999).
- Is not permitted — Prohibits use of fax transmission.
If Counter limit is selected, the Counter limit Default Value screen displays.
Use the numeric keys to enter the
counter limit, up to 999,999 can
be entered in 1 sheet increments.
Press [Enter]
.
The Limit in use screen displays.
Deleting an Account
Use to delete a registered account.
1 Display the Job Accounting screen, refer to Access the Job Accounting
Screen, on page 4-3.
2 Press
S or T to select Edit Job
Accounting and press [Enter].
3 Press
S or T to select Delete and
press [Enter].
Output Limit
Limit in use:
Scanner TX
Fax TX No limit :
No limit :
No limit :
Fax Transmitting:
* No Limit
Counter Limit
Is not permitted
Counter Limit Default Value:
Limitation 999.999
Job Accountg Def. Set.
Job Accounting:
Each Job Accounting TL
Edit Job Accounting
[ ] On
Delete
Edit Job Accounting:
End
New registration