TA Triumph-Adler DC 2116 - Manual (Page 48)

Printer Settings
2-20 ADVANCED OPERATION GUIDE
KPDL Error Printing
The details of any error that occurs during printing in the KPDL emulation
mode can be printed. Continue the procedure from step 5 of Emulation
Mode Selection to set up.
1 Press S or T to select Print
KPDL Errs and press [Enter].
If On is selected, the details of any
error will be printed.
2 Press [Reset]. The Printer Basic screen displays.
KPDL (AUTO) Alternative Emulation Selection
If you set KPDL (AUTO), switching between KPDL and an alternative
emulation mode will be automatically performed according to print data.
Continue the procedure from step 5 of emulation mode selection to setup.
Available emulation modes: PCL6, KC-GL, Line Printer, IBM Proprinter,
DIABLO 630, EPSON LQ-850
1 Press S or T to select Alt.
Emulation and press [Enter].
2 Press S or T to select the
emulation mode and press
[Enter].
3 Press [Reset]. The Printer Basic screen displays.
Back
Print KPDL Errs
KPDL
Back
Alt. Emulation
KPDL(AUTO)
Print KPDL Errs
Back
PCL 6
Alt. Emulation
KC-GL