TA Triumph-Adler DC 2116 - Manual (Page 37)

Printer Settings
ADVANCED OPERATION GUIDE 2-9
e-MPS Detail Settings
The e-MPS settings such as the maximum number of documents that can
be stored on the hard disk and the capacity assigned to each function, can
be changed.
Maximum Number - Quick Copy Jobs
1 Display the e-MPS screen, refer to Access e-MPS, on page 2-3.
2 Press
S or T to select e-MPS
Configuration and press [Enter].
3 Press
S or T to select Quick
Copy and press [Enter].
4 Press < or > to select the
maximum number of jobs that can
be stored, 0 to 50 can be selected.
Press [Enter].
Total Capacity - Temporary Code Jobs
Use to set the total capacity for storage of temporary code jobs on the hard
disk.
1 Display the e-MPS screen, refer to Access e-MPS, on page 2-3.
2 Press S or T to select e-MPS
Configuration and press [Enter].
3 Press S or T to select Temp
Code Job Size and press [Enter].
4 Press < or > to select the capacity
for storage of temporary code
jobs, 0 to 9999 MB can be
selected. Press [Enter].
NOTE: The actual maximum size is the size of available hard disk space.
List of VMB
List of Code JOB
e-MPS
e-MPS Configuration
Back
Quick Copy
e-MPS Configuration
Temp Code Job Size
(0
Quick Copy
32 50)
List of VMB
List of Code JOB
e-MPS
e-MPS Configuration
Back
Quick Copy
e-MPS Configuration
Temp Code Job Size
Temporary Code Job Size
1550 Mbyte