TA Triumph-Adler DC 2116 - Manual (Page 81)

Printer Settings
ADVANCED OPERATION GUIDE 2-53
Stapling Error Detection
You can select whether or not to display Add Staples and Press GO when
staples have run out while stapling is performed.
NOTE: This setting is displayed only if the optional Finisher is installed.
1 Display the Others screen, refer to Access the Others Screen, on page 2-
48.
2 Press S or T to select Finishing
Error and press [Enter].
3 Press S or T to select Staple
Setting and press [Enter].
4 Press S or T to select On or Off
and press [Enter].
5 Press [Reset]. The Printer Basic screen displays.
Setting Processing
On If you select GO, printing is performed without stapling.
If you select CANCEL, printing is canceled.
Off Printing is performed without stapling.
Finishing Error
Auto Continue
Resource Prot.
Others
Finishing Error
Back
Proces. Duplex print
Staple Setting
Staple Setting
Back
On
Off