TA Triumph-Adler DC 2116 - Manual (Page 15)

Copy Functions
ADVANCED OPERATION GUIDE 1-5
Offset Mode
Use this mode to change the orientation of the output at the end of each
set for easy division.
NOTE: If the Document Processor (option) or Finisher (option) is not
installed, use this function with Sort copying.
The paper sizes that can be used for Offset copying are A4, B5 and
11 × 8
1/2 "
NOTE: Ensure the Auto Rotation feature is On, refer to Auto Rotation, on
page 1-15.
1 Position the original and press
[Offset].
2 Press [Sort].
3 Enter the number of copies
required and press [Start].
If using the optional Document
Processor, copying completes
automatically.
If using the platen, a message
displays when the next original is
required. Position the next original
and press [Start].
When all originals have been scanned, press [Enter].