Punch, E 3-20, E 3-20) – TA Triumph-Adler DC 2435 User Manual
Page 114
Advertising
Basic Operation
3-20
Punch
Punch holes in sets of finished copies in preparation for binding.
NOTE:
Requires the optional document finisher and punching unit.
For details on paper sizes that can be punched, refer to Hole Punch Unit (Option) on page Appendix-28.
The orientations of the original and corresponding punch positions are as follows.
NOTE:
The inch model provides two-hole and three-hole punching. The metric model provides two-hole and
four-hole punching.
Original
Copy
Document
processor
Platen
Orientation of Original
Advertising