TA Triumph-Adler DC 2435 - Manual (Page 253)

Sending Functions
6-41
6
Use the procedure below to specify the Bates Stamp settings.
1 Press the Send key.
2 Place the originals on the platen.
3 Press [Advanced Setup] and then press [Bates
Stamp].
4 Press [On].
5 Press [Date], [User Name], [Serial Number],
[Numbering], [Text 1], or [Text 2], and set additional
information to be displayed with the stamp.
If you selected [Text 1] or [Text 2], press [Change]
below it and enter the text string to be displayed.
If you selected [Date], press [Date Format] and
select [MM/DD/YYYY], [DD/MM/YYYY], or [YYYY/
MM/DD] to set the date format.
If you selected [Numbering], press [Numbering
Default] and set the starting sequence number (1 to
9999999).
6 Press [Position] and select the position of the text
stamp.
7 Press [Font] and select font and display settings for
the text stamp.
8 Press [Original Orientation] to choose the
orientation of the originals, either [Top Edge on Top]
or [Top Edge on Left]. Then press [OK].
9 Press [OK].
10 Specify the destination, and press the Start key to
start sending.
Status
Copies
Cancel OK
Bates Stamp
Add Shortcut
On
Off
Stamp
Date User Name
Numbering
Default Position Font Original
Orientation
1 Top Left pt
Black
9 Top Edge
on Top
Numbering Text 1
Serial Number
Text 2
Delete
Text 1 Text 2
Change Change Date Format
[Date]
10/10/2010 10:10
1/6