Setting wia driver – TA Triumph-Adler DC 2435 User Manual
Page 69
Preparation before Use
2-23
2
Setting WIA Driver
Register this machine to the WIA Driver.
The following explanation assumes that Windows 7 is being used.
1
Click the Windows Start button and enter Scanner
in Program and File Search. Click Show
scanners and cameras in the search list. The
Scanners and Cameras screen appears.
2
Select the same name as this machine from WIA
Drivers, and click Properties.
3
Enter the machine name or the host name.
4
When using SSL, select the checkbox beside SSL.
5
When user login administration is enabled, select
the checkbox beside Authentication, and enter a
Login User Name (up to 64 characters) and
Password (up to 64 characters).
When job accounting is enabled, select the
checkbox beside Account ID, and enter the
account ID with as many as eight digits.
6
Click OK.
5
4
3
6