PLANET ADN-4101 - Manual (Page 31)

802.11n Wireless ADSL2/2+ Router
ADN-4101
Field Description
assigned to clients.
Default Gateway Enter the default gateway of the IP address pool.
Max Lease Time
The lease time determines the period that the host retains the assigned IP
addresses before the IP addresses change.
Domain Name
Enter the domain name if you know. If you leave this blank, the domain name
obtained by DHCP from the ISP is used. You must enter host name (system
name) on each individual PC. The domain name can be assigned from the
router through the DHCP server.
DNS Servers You can configure the DNS server IP addresses for DNS Relay.
Set Vendor Class IP Range
Click it, the Device IP Range Table page appears. You can configure the IP
address range based on the device type.
Click Show Client on the DHCP Mode page and the page shown in the following figure appears. You can view the IP
address assigned to each DHCP client.
The following table describes the parameters and buttons on this page:
Field Description
IP Address It displays the IP address assigned to the DHCP client from the router.
MAC Address
It displays the MAC address of the DHCP client.
Each Ethernet device has a unique MAC address. The MAC address is
assigned at the factory and it consists of six pairs of hexadecimal character, for
example, 00-A0-C5-00-02-12.
Expiry (s)
It displays the lease time. The lease time determines the period that the host
retains the assigned IP addresses before the IP addresses change.
Refresh Click it to refresh this page.
Close Click it to close this page.
26