PLANET ADN-4101 - Manual (Page 65)

802.11n Wireless ADSL2/2+ Router
ADN-4101
3.6.8.2 Client Limit
Choose Advance > Others > Client Limit and the page shown in the following figure appears. This page is used to
configure the capability of forcing how many devices can access to the Internet.
3.6.8.3 Others
Choose Others in the left pane and the page shown in the following figure appears. You can enable half bridge so that
the PPPoE or PPPoA connection will set to Continuous.
3.7 Admin
In the navigation bar, click Admin. The Admin page displayed contains Commit/Reboot, Update, Log, Password,
and Time.
3.7.1 Commit/Reboot
Choose Admin > Commit/Reboot and the page shown in the following figure appears. You can set the router reset to
the default settings or set the router to commit the current settings.
The following table describes the parameters and button on this page:
Field Description
Reboot from
You can choose Save current configuration or Factory default configuration.
Save current configuration: Save the current settings, and then reboot the
router.
Factory default configuration: Reset to the factory default settings and then
reboot the router.
Reboot Click it to reboot the router.
3.7.2 Update
Choose Admin > Update. The Update page displayed contains Upgrade Firmware and Backup/Restore.
60