PLANET ADN-4101 - Manual (Page 71)

802.11n Wireless ADSL2/2+ Router
ADN-4101
66
Chapter 4. Q&A
Question Answer
Why are all the indicators off?
Check the connection between the power adapter and the power socket.
Check whether the power switch is turned on.
Why is the LAN indicator not on?
Check the following:
The connection between the device and the PC, the hub, or the switch
The running status of the computer, hub, or switch
The cables connecting the device and other devices. Use a cross-over cable to
connect the device to a computer. Use a straight-through cable to connect the device
to a hub or a switch,
Why is the Link indicator not on? Check the connection between the Line interface of the device and the socket.
Why does the Internet access fail when the
Link indicator is on?
Ensure that the following information is entered correctly.
VPI and VCI
User name and password
Why does the web configuration page of the
device fail to be accessed?
Choose Start > Run from the desktop. Enter Ping 192.168.1.1 (the default IP address of
the device) in the DOS window.
If the web configuration page still cannot be accessed, check the following configurations.
The type of network cable
The connection between the device and the computer
The TCP/IP properties of the network card of the computer
How to restore the default configuration after
incorrect configuration?
Keep the device powered on and press the Reset button for 3 seconds, then the device
automatically reboots and is restored to the factory default configuration.
The default configurations of the device are as follows:
IP address: 192.168.1.1
Subnet mask: 255.255.255.0.
For a super user, use admin for both user name and password.