PLANET ADN-4101 - Manual (Page 36)

802.11n Wireless ADSL2/2+ Router
ADN-4101
The following table describes the parameters and buttons on this page:
Field Description
Protocol It displays the protocol type used for this WAN connection.
ATM VCC The ATM virtual circuit connection assigned for this PPP interface
(VPI/VCI).
Login Name The user name provided by your ISP.
Password The password provided by your ISP.
Authentication Method You can choose AUTO, CHAP, or PAP.
Connection Type You can choose Continuous, Connect on Demand, or Manual.
Idle Time (s) If choose Connect on Demand, you need to enter the idle timeout
time. Within the preset minutes, if the router does not detect the flow of
the user continuously, the router automatically disconnects the PPPoE
connection.
Bridge You can select Bridged Ethernet, Bridged PPPoE, or Disable Bridge.
AC-Name The accessed equipment type.
Service-Name The service name.
802.1q You can select Disable or Enable. After enable it, you need to enter the
VLAN ID. The value ranges from 1 to 4095.
Apply Changes Click it to save the settings of this page temporarily.
Return Click it to return to the Channel Configuration page.
Reset Click it to refresh this page.
Source Mac address The MAC address you want to clone.
MAC Clone Click it to enable the MAC Clone function with the MAC address that is
configured.
31