PLANET ADN-4101 - Manual (Page 43)

802.11n Wireless ADSL2/2+ Router
ADN-4101
The following table describes the parameters on this page:
Field Description
Authentication
Select the modem operating in the open system or encryption authentication.
You can choose Open System, Shared Key, or Auto.
In the open system, the wireless client can directly connect to the device
In the encryption authentication, the wireless client connects to the
modem through the shared key.
Data Rate
Choose the transmission rate of the wireless data.
You can choose Auto, 1 M, 2 M, 5.5 M, 11 M, 6 M, 9 M, 12 M, 18 M, 24 M, 36
M, 48 M, 54M, MSC0 ~ MSC7.
PreambleType
Long Preamble: It means this card always use long preamble.
Short Preamble: It means this card can support short preamble
capability.
Broadcast SSID
Select whether the modem broadcasts SSID or not. You can select Enable
or Disable.
Select Enable, the wireless client searches the modem through
broadcasting SSID.
Select Disable to hide SSID, the wireless clients can not find the SSID.
Relay Blocking
Wireless isolation. Select Enable, the wireless clients that are connected to
the modem can not intercommunication.
Ethernet to Wireless Blocking
Whether the wireless network can communicate with the Ethernet network or
not.
Wifi Multicast to Unicast Enable it to using unicast to transmit multicast packet
Aggregation It is applied when the destination end of all MPDU are for one STA.
Short GI
It is not recommended to enable GI in obvious environment of Multi-path
effect.
Apply Changes
Click it to apply the settings temporarily. If you want to save the settings of
this page permanently, click Save in the lower left corner.
3.4.3.6 WPS
Choose WLAN > WPS and the following page appears.
38