PLANET ADN-4101 - Manual (Page 52)

802.11n Wireless ADSL2/2+ Router
ADN-4101
3.5.5 TR-069
Choose Service > TR-069 and the page shown in the following page appears. On this page, you can configure the
TR-069 CPE.
The following table describes the parameters on this page:
Field Description
ACS
URL
The URL of the auto-configuration server to connect to.
User Name The user name for logging in to the ACS.
Password The password for logging in to the ACS.
Periodic Inform Enable Select Enable to periodically connect to the ACS to check whether the
configuration updates.
Periodic Inform Interval Specify the amount of time between connections to ACS.
Connection Request
User Name
The connection username provided by TR-069 service.
Password The connection password provided by TR-069 service.
Debug
Show Message
Select Enable to display ACS SOAP messages on the serial console.
CPE sends GetRPC Select Enable, the router contacts the ACS to obtain configuration
updates.
Skip MReboot Specify whether to send an MReboot event code in the inform message.
Delay Specify whether to start the TR-069 program after a short delay.
Auto-Execution Specify whether to automatically start the TR-069 after the router is
powered on.
47