ProSoft Technology MVI46-PDPMV1 - Manual (Page 147)

MVI46-PDPMV1 ♦ SLC Platform Reference
PROFIBUS DPV1 Master User Manual
ProSoft Technology, Inc. Page 147 of 160
March 25, 2011
Connection terminal assignment on the PROFIBUS DP:
A Incoming cable
B Outgoing cable
C Connection terminals (only once (B,A))
D Cable cleat for reliving tension
E Bus connector screws
6 Attach the cables with the provided cable cleat to create a robust shielded
connection and to relieve any tension as shown:
J PVC Jacket
S Braided shielding with foil shielding
C Cable cleat

Note: Half of the cable jacket must lie under the cable cleat!
Pay attention to the cable cleat installation instructions.
7 Fasten the individual wires of the PROFIBUS cable to the terminals
8 Close the connector housing.