ProSoft Technology MVI46-PDPMV1 - Manual (Page 67)

MVI46-PDPMV1 ♦ SLC Platform Mailbox Messaging
PROFIBUS DPV1 Master User Manual
ProSoft Technology, Inc. Page 67 of 160
March 25, 2011
Note 1: It is only possible to send control commands when operating mode is either "CLEAR" or
"OPERATE".
Note 2: Not all slaves support this feature. Refer to the documentation for the actual slave for more
information.
Parameter Description
Command Initiator Application
Command Name SET SLAVE MODE
Command Number 0300h
Fragmented No
Extended Header Data Fault information may be returned in the header of the response.
Command and Response Layout: Set Slave Mode
Command Response
Message ID (ID) (ID)
Message information 4002h 0002h
Command 0003h 0003h Set Slave Mode
Data size 0000h 0000h
Frame count 0001h 0001h
Frame number 0001h 0001h
Offset high 0000h 0000h
Offset low 0000h 0000h
Extended word 1 Slave
Address
Group Select Slave
Address
Group Select
Extended word 2 Control
Command
Control
Command
Extended word 3 - -
Extended word 4 - -
Extended word 5 - -
Extended word 6 - -
Extended word 7 - Extended Fault Information
Extended word 8 Fault Information
Message Information
Refer to Message Information (page 90).