ProSoft Technology RLXIB-IHN-W-E - Manual (Page 131)

RLXIB-IHN-WC ♦ 802.11n Diagnostics and Troubleshooting
Weatherproof Industrial Hotspot User Manual
ProSoft Technology, Inc. Page 131 of 131
July 9, 2012
4.4 Retrieve the Default Password
If you forget your password, you will be unable to change the radio settings. You
can retrieve the default password to use the software again, but you will lose all
the settings you programmed before. To retrieve the default password and return
the radio to its default settings, follow these steps:
1 Turn OFF power to the radio.
2 Feel for the reset button, located under the red "diamond" on the face of the
radio.
3 Turn ON power to the radio, and wait for the Power LED to turn green.
4 When the Power LED turns green, press and hold the reset button for at least
five seconds.
5 The radio will reload its default settings, including the PASSWORD . You should
now be able to log in using the default USERNAME and PASSWORD .
o
The default administrator USERNAME is "admin"
o The default PASSWORD is "password"
o The USERNAME and PASSWORD are case sensitive