ProSoft Technology RLXIB-IHN-W-E - Manual (Page 78)

RadioLinx Configuration Manager RLXIB-IHN-WC ♦ 802.11n
User Manual Weatherproof Industrial Hotspot
Page 78 of 78 ProSoft Technology, Inc.
July 9, 2012
SNMP Access Control Configuration
This configuration page allows you to add or modify an access control rule for a
given SNMP manager or trap agent as identified by its IP address and
community.
Parameter Description
IP Address The IP Address of the specific SNMP manager or trap agent on which
to create an access rule
Subnet Mask The network mask used to determine the list of allowed SNMP
managers.
Community The community string associated to the agent. Most agents are
configured to listen for traps in the Public community.
Access Type The SNMP manager or trap agent can either be allowed to read and
modify all SNMP accessible settings (
rwcommunity) or be given read-
only access ( rocommunity).
Click
Apply to save your changes.
Click Clear to discard your changes.
SNMP Trap Configuration
This page allows you to add a new SNMP manager/trap agent or edit the
configuration of an existing SNMP manager/trap agent.
Parameter Description
IP Address The IP address of the SNMP agent.
Port The SNMP trap port to which the trap messages will be sent.
Community The community string associated to the agent. Most agents are
configured to listen for traps in the public community.
SNMP Version This device supports SNMP protocols v1, v2c and v3.
Click Apply to save your changes.
Click Clear to discard your changes.