ProSoft Technology RLXIB-IHN-W-E - Manual (Page 61)

RLXIB-IHN-WC ♦ 802.11n RadioLinx Configuration Manager
Weatherproof Industrial Hotspot User Manual
ProSoft Technology, Inc. Page 61 of 61
July 9, 2012
Parameter Description
Stale Time Enter the maximum age in seconds (1 to 60, default 15 seconds) to
remove an entry from the Available Parent List if a beacon frame is not
received within the stale time.
Dwell Time Enter the time in milliseconds (1 to 1000, default 15 milliseconds) that
the radio should scan each channel for parents.
Scan Rounds Enter the number of times (1 to 5, default 2 rounds) the non-associated
repeater or client should scan all available channels to populate the
Available Parent List, before it connects to a parent candidate.
Selection Frequency Enter the time in seconds (0.1 to 10 seconds, default 1 second) to
check for another parent candidate while the radio is already associated
to a parent.
Strong RSSI Threshold Enter the RSSI value (-100 to -20 dBm, default -60 dBm) above which a
stronger signal is not beneficial in the cost calculation for an available
parent.
RSSI Averaging Factor Enter a value from 2 to 128 to determine how long to average the RSSI
measured from a potential parent. Default is 32.
Hysteresis Enter a value from 1 to 10 dBm (default 3 dBm) to adjust the preference
given to the current parent to prevent inadvertent switching between
parent radios.
Click
Apply to save your changes.
Click Clear to discard your changes.
Available Parents List
This page displays the list of available parents for this RLXIB-IHN-W radio. This
page does not apply to a radio configured as a Master.
Select (check) the
F ILTER BY MY SSID checkbox and click A PPLY to restrict the list
of available parents to those with the same SSID as the radio you are
configuring.
Both the selected parent and all other potential detected parents will be listed. A
green dot in the leftmost column indicates the selected parent.