ProSoft Technology RLXIB-IHN-W-E User Manual
Page 31
RLXIB-IHN-WC ♦ 802.11n
Start Here
Weatherproof Industrial Hotspot
User Manual
ProSoft Technology, Inc.
Page 31 of 31
July 9, 2012
Connections on the bottom of the radio, from left to right are:
o
Power (not used when PoE option is used)
o
Ethernet (with PoE option)
RLXIB-IHN-WC has the connection shown below and differs from the RLXIB-
IHN-W.
Note: After you plug in the Power over Ethernet (PoE) cable, the radio performs a startup
procedure that includes a self-test, loading the main program, and initializing the radio. The front
panel LEDs will illuminate after approximately two seconds. The entire startup procedure can take
up to 30 seconds.
After the startup procedure has completed successfully, the Power LED should
be GREEN, meaning that the radio has power. The Ethernet LED should also be
GREEN, meaning that the Ethernet connection is working. The RF Transmit and
RF Receive LEDs should blink.
For information on making connections, see Radio Power Requirements (page
138) and Cable Specifications (page 139, page 138).