ProSoft Technology RLXIB-IHN-W-E - Manual (Page 77)

RLXIB-IHN-WC ♦ 802.11n RadioLinx Configuration Manager
Weatherproof Industrial Hotspot User Manual
ProSoft Technology, Inc. Page 77 of 77
July 9, 2012
Access Control List
The SNMP Access Control List is a table of access rules that enables read-only
or read-write access for select IP addresses in a defined SNMP agent's
community.
Parameter Description
IP Address The IP Address of the specific SNMP manager or trap agent on which
to create an access rule.
Subnet Mask The network mask used to determine the list of allowed SNMP
managers.
Community The community string to which the agent belongs to. Most agents are
configured to listen for traps in the Public community.
Access Type The SNMP manager or trap agent can either be allowed to read and
modify all SNMP accessible settings (rwcommunity) or be given read-
only access (rocommunity).
!(Edit) The Edit button will link to the SNMP Access Control Configuration
page, allowing you to make changes to the selected access control
rule.
The actions that can be taken on SNMP access control rules are:
Parameter Description
Select All Selects all SNMP access control rules in the table.
Delete Deletes the selected SNMP access control rule or rules.
Add Clicking this button will link to the SNMP Access Control Configuration
page.
Traps List
This table lists IP addresses of SNMP agents to which the device will send trap
messages and allows several operations on the SNMP agents.
Parameter Description
IP Address The IP Address of the SNMP manager or trap agent.
Port The SNMP trap port of the IP address to which the trap messages will
be sent (typically UDP port 162).
Community The community string associated to the agent. Most agents are
configured to listen for traps in the Public community.
SNMP Version SNMP protocol version used by the defined trap agent.
Edit Opens the SNMP Trap Configuration page, allowing you to make
changes to the selected SNMP Agent.
The actions that can be taken on SNMP agents are:
Parameter Description
Select All Selects all the SNMP agents in the table.
Delete Deletes the selected SNMP agent or agents.
Add: Clicking this button will link to the SNMP Trap Configuration page.