Canon PowerShot G7 X Mark II - Manual (Page 121)

121
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Before Use
Index
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Playback Mode
Choosing Images Individually
1
Choose [Select].
z Following the procedure in “Using the
Menu” (= 121), choose [Select] and
press the [ ] button.
2
Choose an image.
z Press the [ ][ ] buttons or turn the [ ]
dial to choose an image, and then press
the [ ] button. [ ] is displayed.
z To cancel selection, press the [ ] button
again. [ ] is no longer displayed.
z Repeat this process to specify other
images.
3
Protect the image.
z Press the [ ] button. A confirmation
message is displayed.
z Press the [ ][ ] buttons or turn the [ ]
dial to choose [OK], and then press the
[ ] button.
● Images will not be protected if you switch to Shooting mode or
turn the camera off before finishing the setup process in step 3.
● You can also select or clear images by touching the screen in
step 2, and you can access the confirmation screen by touching
[
].
● You can also protect images by touching [OK] on the screen in
step 3.
Protecting Images
Still Images Movies
Protect important images to prevent accidental erasure (= 123).
z Press the [ ] button, choose [ ] in
the menu, and then choose [ ] (either
press the [ ][ ] buttons or turn the [ ]
dial). [ ] is displayed.
z To cancel protection, choose [OFF].
[ ] is no longer displayed.
● Protected images on a memory card will be erased if you format
the card (= 169).
● Protected images cannot be erased using the camera’s erasure
function. To erase them this way, first cancel protection.
Using the Menu
1
Access the setting screen.
z Press the [ ] button and choose
[Protect] on the [ 1] tab (= 30).
2
Choose a selection method.
z Choose an option as desired (= 30).
z To return to the menu screen, press the
[ ] button.