Preventing the af-assist beam from firing, Customizing camera operation, And subjects are enlarged (= 53) – Canon PowerShot G7 X Mark II User Manual
Page 53
53
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Before Use
Index
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Customizing Camera Operation
Customize shooting functions on the [ ] tab of the menu screen as
follows.
For instructions on menu functions, see “Using the Menu Screen”
Preventing the AF-Assist Beam from Firing
Still Images
Movies
You can deactivate the lamp that normally lights up to help you focus
when you press the shutter button halfway in low-light conditions.
z
Press the [
] button, choose
[AF-assist Beam] on the [ 4] tab,
and then choose [Off].
z
To restore the original setting, repeat this
process but choose [On].
Recording Movies with Subjects at the Same
Size Shown before Shooting
Still Images
Movies
Normally, once movie recording begins, the image display area changes
and subjects are enlarged to allow for image straightening and correction
of significant camera shake.
To record movies with subjects at the same size shown before shooting,
you can reduce image stabilization and cancel Auto Level.
z
Set [ Auto level] to [Disable] as
described in “Deactivating Auto Level”
z
Follow step 1 in “Deactivating Image
Stabilization” (= 52) to access the
[IS Settings] screen.
z
Choose [Dynamic IS], and then choose
●
You can also set [IS Mode] to [Off], so that subjects are recorded
at the same size shown before shooting.
●
[Dynamic IS] is not available when [IS Mode] is set to [Off]
(= 52).
●
Only [Standard] is available when the movie quality is [
]
(NTSC) or [
] (PAL).