Canon PowerShot G7 X Mark II - Manual (Page 97)

97
Tv, Av, M, and C Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Before Use
Index
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Other Settings
Changing Image Quality
Still Images Movies
Choose from 7 combinations of size (number of pixels) and compression
(image quality). Also specify whether to capture images in RAW format
(= 98). For guidelines on how many of each kind of image can fit on a
memory card, see “Number of Shots per Memory Card” (= 220).
z Press the [ ] button, choose [ ] in the
menu, and choose the desired option
(= 29).
z The option you configured is now
displayed.
z To restore the original setting, repeat this
process but choose [ ].
● [ ] and [ ] indicate different levels of image quality depending
on the extent of compression. At the same size (number of
pixels), [
] offers higher image quality. Although [ ] images
have slightly lower image quality, more fit on a memory card.
Note that [ ] is image quality of [ ].
● Not available in [ ] mode.
● You can also configure this setting by choosing MENU (= 30)
► [
1] tab ► [Image quality].
When deciding the number of pixels based on print size, use the following
table as a guide for images with a 3:2 aspect ratio.
A2 (16.5 x 23.4 in.)
A3 (11.7 x 16.5 in.)
A4 (8.3 x 11.7 in.)
3.5 x 5 in., 5 x 7 in., Postcard
Changing the Flash Timing
Still Images Movies
Change the timing of the flash and shutter release as follows.
1
Access the setting screen.
z Press the [ ] button, choose [Flash
Settings] on the [ 5] tab, and then press
the [ ] button (= 30).
2
Configure the setting.
z Choose [Shutter Sync.], and then choose
the desired option (= 30).
1st-curtain The flash fires immediately after the shutter opens.
2nd-curtain The flash fires immediately before the shutter closes.