HP 20-Feb - Manual (Page 127)

Chapter 4 Understanding Error States 125
Chapter 4
Power supply fault Library detected one or more
redundant power supplies in a
failed condition.
■
Determine which power supply
has failed. (See Table 26 on page
139 for LED status information.)
■
Contact your service
representative to replace the
power supply.
Library fan failure A library card cage fan has failed.
■
Power cycle the library.
■
Contact your service
representative.
Upgrade library
firmware
A library component has firmware
that is different from the rest of the
library.
Note: This is a common problem
when replacing parts.
■
Update library firmware. (See
Upgrading Firmware on
page 176.)
Table 18 Partial Availability Conditions
Library Status Cause Solution