HP 20-Feb - Manual (Page 53)

Chapter 1 Verifying the Host Configuration 51
Cha
pter 1
Windows NT
For Windows NT™ operating systems, perform the following operating system
configurations:
■
Install the appropriate host bus adapter(s)
■
Install the corresponding drivers for the interface card(s)
■
To verify the hardware installation, look for the library and drives after
powering up the host. Go into Settings -> Control Panel -> SCSI Adapter.
■
Install the backup software
■
Run a test backup to ensure that all components are properly configured.
Windows 2000
For Windows 2000™ operating systems, perform the following operating
system configurations:
■
Install the appropriate host bus adapter(s)
■
Install the corresponding drivers for the interface card(s)
■
To verify the hardware installation, look for the library and drives after
powering up the host:
— Right click on My Computer
— Select Manage -> System Tools -> Device Manager
— Medium Changer and Tape Drives should be listed
■
Install the backup software
■
Run a test backup to ensure that all components are properly configured.