Figure 5, Front back – HP 20-Feb User Manual
Page 23
Chapter 1
Installing the 2/20, 4/40 & 6/60 Series Libraries into a Rack 21
Cha
pter 1
Figure 5
Clip Nut Placement (6/60 Series)
2. Align the upper (black) rail with the top two clip nuts and loosely install a
screw into each clip nut. Slide the rail out so that it equals the rack depth,
and attach to the back clip nuts. To allow for enough clearance, do not
tighten these screws until you have installed the library.
Note
Ensure that you are using the appropriate holes in the upper rail
to allow enough clearance, illustrated in
The clearance between the top and bottom rails should be
approximately: 2/20 series = 22 cm (9 in); 4/40 series = 43 cm
(17 in); 6/60 series = 65 cm (26 in).
a
#
#
#
#
#
#
##
##
##
##
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
##
##
##
##
b
Front
Back