HP 20-Feb - Manual (Page 25)

Chapter 1 Installing the 2/20, 4/40 & 6/60 Series Libraries into a Rack 23
Cha
pter 1
4. Install the library.
WARNING The majority of the weight is near the back of the library. Use
appropriate force when lifting the library, while ensuring the
library remains level to avoid overturning.
Note To reduce the weight of the library, you can easily remove all the
drives. See Removing and Replacing Drive Modules on
page 162 for more information.
2/20 Series Library:
With the help of another person, use the lifting straps built into the sides of
the library, and slide the library between the upper and lower sets of
mounting rails. Remove the lifting straps once the library is partially
installed. Save these straps for future use when moving the library.
Figure 7 Lifting Straps