Drive and tape operations, Loading a tape into a drive, Drive and tape operations 86 – HP 20-Feb User Manual
Page 88: Loading a tape into a drive 86
86 Drive and Tape Operations
Chapter 2
Drive and Tape Operations
Look at the product information labels on the back of the library and the labels
inside each tape drawer for more information about drive and slot numbering.
The numbering scheme is also illustrated in
Note
The “Home” and “Map” front panel screens illustrate the drive,
slot, and mailslot numbering schemes. Slot numbers displayed in
reverse video indicate those reserved for the mailslot.
Loading a Tape Into a Drive
1. From the
Drive and Tape Operations
menu, select
[Load Tape from Drive]
.
2. Use
the
[-]
or
[+]
key to select any slot. Only full slots are available for
selection.
Select
[OK]
.
3. Use
the
[-]
or
[+]
key to select the desired drive. You can only select empty
drives that are compatible with the tape type.
4. Select
[Load]
to move the tape from a slot to a drive.
A confirmation screen indicates that the tape is loaded.
Main Menu -> Operations -> Drive and Tape Operations