HP 20-Feb User Manual
Page 181
Chapter 5
Upgrading Firmware 179
Ch
apter 5
Using a Firmware Upgrade Tape (drive firmware only)
1. Contact your service representative to get the drive upgrade tape.
2. Ensure that the drive is empty. The drive icon(s) on the Home screen
indicates the presence of a tape in the drive. If a tape is in the drive, use
the front panel to return the tape to a storage slot. See
3. Place the firmware upgrade tape in an available storage slot in the library,
and note the slot number.
4. Use the following menu to perform the firmware upgrade:
5. From
the
Upgrade Drive Firmware menu, use the [-], [+] or [++] key to
select the slot containing the firmware upgrade tape. Select [OK].
6. Use
the
[-] or [+] key to select the drive that you want to upgrade. Select
[OK].
7. Watch the upgrade status on the library’s front panel. Only drives that are
online and empty (not reserved) can be upgraded.
Note
When the operation is complete, the tape will be returned to its
original slot.
8. Remove the firmware upgrade tape from the library.
Main Menu -> Administration -> Upgrade Drive Firmware