HP 20-Feb - Manual (Page 14)

12 Identifying Product Components Chapter 1
Identifying Product Components
The components listed in Table 1 may be supplied with the library, depending
on the library configuration.
Note Visit http://www.hp.com/go/support for additional information
on the HP Library & Tape Tools diagnostic utility, backup
software compatibility information, accessories, and upgrade
kits.
Table 1 Accessories
Callout
Number
Component Description
1 SCSI interface cable(s) Four-meter SCSI cable(s) with 68-pin high-density connectors.
2 SCSI jumper cable(s) 68-pin VHD (Very High Density) cable that connects the
library controller or Fibre Channel controller to a drive.
3 Fibre Channel cable(s) Optical short-wave cable (16 meters) that connects the Fibre
Channel controller to the host, hub, or switch (for Fibre
Channel configurations).
4 Label kit Bar code labels for data and cleaning cartridges, and
reordering information.
5 Power cord(s) Localized power cord(s).
6 SCSI terminator(s) 68-pin high-density SCSI terminator (HVDS or LVDS) to
terminate the SCSI chain.
7 Fibre Channel GBIC Connects the Fibre Channel cable to the host, hub, or switch
when necessary.
8 Data cartridge Data cartridge included for data backup.
9 Cleaning cartridge Cleaning cartridge used when cleaning a drive.
10 User’s Guide Printed English user’s guide describing installation,
operations, and troubleshooting information.