HP 20-Feb - Manual (Page 24)

22 Installing the 2/20, 4/40 & 6/60 Series Libraries into a Rack Chapter 1
3. Align the lower (black/silver) rail with the lower two clip nuts, and loosely
install a screw into each clip nut. (See Figure 6 .)
a. Slide the rail so that it equals the rack depth, and loosely install the
screws.
b. Tighten all screws to secure the rails.
c. Tighten the two pre-installed screws inside each mounting rail to
secure the rail in position.
Figure 6 Upper and Lower Rails
60
40
20