MITSUBISHI ELECTRIC MR-J2S- CL - Manual (Page 157)

5 - 24
5. PARAMETERS
(2) Contents of a setting
The servo amplifier is factory-set to output the servo motor speed to analog monitor 1 and the torque
to analog monitor 2. The setting can be changed as listed below by changing the parameter No.17
(analog monitor output) value:
Setting Output item Description Setting Output item Description
0 Servo motor speed
8[V]
Max. speed
0 Max. speed
-8[V]
CCW direction
CW direction
6 Droop pulses
( 10V/128pulse)
10[V]
0 128[pulse]
-10[V]
CCW direction
CW direction
128[pulse]
1 Torque
8[V]
Max. torque
0 Max. torque
-8[V]
Driving in CW direction
Driving in CCW direction
7 Droop pulses
( 10V/2048pulse)
10[V]
0 2048[pulse]
-10[V]
CCW direction
CW direction
2048[pulse]
2 Servo motor speed
8[V]
Max. speed 0 Max. speed
CCW
direction CW
direction
8 Droop pulses
( 10V/8192pulse)
10[V]
0 8192[pulse]
-10[V]
CCW direction
CW direction
8192[pulse]
3 Torque
8[V]
Max. torque 0 Max. torque
Driving in
CCW direction Driving in
CW direction
9 Droop pulses
( 10V/32768pulse)
10[V]
0 32768[pulse]
-10[V]
CCW direction
CW direction
32768[pulse]
4 Current command
8[V]
Max. command
current
0 Max. command
current
-8[V]
CCW direction
CW direction
A Droop pulses
( 10V/131072pulse)
10[V]
0
131072[pulse]
-10[V]
CCW direction
CW direction
131072[pulse]
5 Speed command
8[V]
Max. speed
0 Max. speed
-8[V]
CCW direction
CW direction
B Bus voltage
8[V]
0 400[V]