MITSUBISHI ELECTRIC MR-J2S- CL - Manual (Page 164)

6 - 5
6. SERVO CONFIGURATION SOFTWARE
(3) Parameter value batch-read ( c) )
Click the “Read All” button to read and display all parameter values from the servo amplifier.
(4) Parameter value batch-write ( d) )
Click the “Write All” button to write all parameter values to the servo amplifier.
(5) Parameter change list display ( e) )
Click the “Change List” button to show the numbers, names, initial values and current values of the
parameters whose initial value and current value are different. In the offline mode, the parameter
change list is not shown.
(6) Parameter detail information ( f) )
Click the “Help” button or double-click the display field to show the detailed explanation of each
parameter.
(7) Parameter default value indication ( g) )
Click the “Set to default” button to show the initial value of each parameter.
(8) Parameter value change ( h) )
Choose the parameter to be changed, enter a new value into the “Parameter value” input field, and
press the enter key or Enter Data button.
(9) Parameter data file read
Used to read and display the parameter values stored in the file. Use the file selection window to read.
(10) Parameter value storage
Used to store all parameter values being displayed on the window into the specified file. Use the file
selection window to store.
(11) Parameter data list print
Used to print all parameter values being displayed on the window. Use the “File” menu on the menu
bar to print.
(12) Parameter list window closing ( i) )
Click the “Close” button to close the window. If the “Close” button is clicked without (1) parameter
value write or (4) parameter value batch-write being performed, the parameter value changed is
made invalid.