MITSUBISHI ELECTRIC MR-J2S- CL - Manual (Page 171)

6 - 12
6. SERVO CONFIGURATION SOFTWARE
(2) Screen explanation
(a) DIDO device setting window screen
This is the device assignment screen of the servo amplifier displays the pin assignment status of
the servo amplifier.
b)
d)
c)
a)
1) Read of function assignment ( a) )
Click the “Read” button reads and displays all functions assigned to the pins from the servo
amplifier.
2) Write of function assignment ( b) )
Click the “Write” button writes all pins that are assigned the functions to the servo amplifier.
3) Verify of function assignment ( c) )
Click the “Verify” button verifies the function assignment in the servo amplifier with the device
information on the screen.
4) Initial setting of function assignment ( d) )
Click the “Set to Default” button initializes the function assignment.