MITSUBISHI ELECTRIC MR-J2S- CL - Manual (Page 45)

2 - 2
2. INSTALLATION
2.2 Installation direction and clearances
CAUTION
Do not hold the front cover to transport the controller. The controller may drop.
The equipment must be installed in the specified direction. Otherwise, a fault may
occur.
Leave specified clearances between the servo amplifier and control box inside
walls or other equipment.
(1) Installation of one servo amplifier
Control box Control box
10mm
(0.4 in.)
or more 10mm
(0.4 in.)
or more
40mm
(1.6 in.)
or more
40mm
(1.6 in.)
or more
Wiring clearance
70mm
(2.8 in.)
Servo amplifier
Up
Down